Tektronix AFG3000C Series User Manual

Application Examples
1. Connect the CH1 and
CH2 Outputs of the
dual-channel
instrument
and the CH1 and CH2
Inputs o f an oscilloscope
with BNC cable
s. Set the
waveform parameters as
follows:
Sine (Continuos)
Amplitude: 1 V
CH1 Frequency:
400 kHz
CH2 Freque
ncy:
500 kHz
2. Set the oscilloscope
display format to XY.
Adjust th
e amplitude
so that the waveform is
shown in the graticule.
ALissaj
ous pattern is
displayed.
3. Use the general purpose
knob on the instrument
to chan
ge the phase of
CH1 or CH2. Observe
that the Lissajous pattern
chang
es shape.
92 AFG3000 and AFG3000C Series User Manual

Tektronix AFG3000C Series Specifications

General

Brand	Tektronix
Model	AFG3000C Series
Category	Inverter
Language	English