Getting started
Before Instal
lation
Inspect the instrument carton for external damage. If the carton is damaged,
notify the carrier.
Remove the instrument from its package and check that it has not been damaged in
transit. Verify that the carton contains the instrument and its standard accessories.
Operating Requirements
Environmental
1. Place the instrument on a cart or bench, observing
clearance requirements:
Sides: 50 mm (2 in)
Rear: 50 mm (2 in)
2. Before operating, ensure that the ambient
temperature is between 0 °C to +50 °C (+32 °F
to +122 °F).
CAUTION. To ensure proper cooling, keep both sides of the instrument clear of
obstr
uctions.
Power Supply
Requirements
WARNING. To reduce the risk of fire and shock, ensure that the mains supply
voltage fluc
tuations do not exceed 10% of the operating voltage range.
Requiremen
t
AFG3000 series / AFG3000B series / AFG3000C series
Source Voltage and Frequency
100 V to 240
V, 47 Hz to 63 Hz; or 115 V, 360 Hz to 440 Hz
Power C onsumption
Less than 1
20 W
4 AFG3000 and AFG3000C Series User Manual
To Next Page
Loading...
Need help?
General
