Tektronix AFG3000C Series User Manual

Getting started
If you cannot establish
communication by setting
DHCP On, you ne
ed to set up
an IP Address manually and
a Subnet Mask if necessary.
Follow these
steps:
5. Display the Ethernet
Network Set
tings menu
and select DHCP Off.
6. Push the IP Address
bezel butto
n to enter an
IP address. You need
to contact your network
administr
ator to get the IP
address to use.
7. Push the Subnet Mask
bezel but
ton to enter a
Subnet Mask. Ask your
network administrator
whether a
subnet mask is
required.
8. Push the Default Gateway
bezel bu
tton to enter
a gateway address.
Ask your network
admini
strator for the
gateway address.
GPIB Setup
To set the instrument GPIB interface, follow these steps:
1. Conne
ct a GPIB c able to
the rear panel GPIB port.
2. Push the front-panel
Utility button.
20 AFG3000 and AFG3000C Series User Manual

Tektronix AFG3000C Series Specifications

General

Brand	Tektronix
Model	AFG3000C Series
Category	Inverter
Language	English