To Next Page

To Previous Page

Application Examples

1. Connect the CH1 and

CH2 Outputs of the

dual-channel

instrument

and the CH1 and CH2

Inputs o f an oscilloscope

with BNC cable

s. Set the

waveform parameters as

follows:

Sine (Continuos)

Amplitude: 1 V

CH1 Frequency:

400 kHz

CH2 Freque

ncy:

500 kHz

2. Set the oscilloscope

display format to XY.

Adjust th

e amplitude

so that the waveform is

shown in the graticule.

ALissaj

ous pattern is

displayed.

3. Use the general purpose

knob on the instrument

to chan

ge the phase of

CH1 or CH2. Observe

that the Lissajous pattern

chang

es shape.

92 AFG3000 and AFG3000C Series User Manual

Tektronix AFG3011C User Manual

Other manuals for Tektronix AFG3011C