Installation
Powering On the Oscilloscope
Ground the Oscilloscope and Yourself
Before pushing the power switch, connect the oscilloscope to an e lectrically neutral reference point, such as earth ground. Do this
by plugging the three-pronged power cord into an outlet ground ed to earth ground.
Grounding the oscilloscope is ne cessary for safety and to take accurate measurements. The oscilloscope needs to sha re the
same ground as any circuits that you are testing.
To con nect the power cord and power on the oscilloscope:
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 15
To Next Page
Loading...
