Tektronix KEITHLEY 2200 Series User Manual

Commands Listed in Alphabetical Order
Group
Source
Syntax
[SOURce:]OUTPut:TIMer[:STATe] {0|1|ON|OFF}
[SOURce:]OUTPut:TIMer[:STATe]?
Related Commands
[SOURce:]OUTPut:TIMer:DELay, [SOURce:]OUTPut[:STATe][:ALL],
INSTrument:SELect
Arguments
0 or OFF turns the output timer off.
1 or ON turns the output timer on.
Returns
0|1
Examples
To activate the timer, first send OUTPUT:TIMER:STATE ON,thensend
OUTPUT:STATE ON.
To turn the timer off, send
OUTPUT:TIMER:STATE OFF.
[SOURce:]VOLTage[:LEVel]:DOWN[:IMMediate][:AMPLitude] (No Query Form)
This comma nd is used to decrease the voltage level of t he currently selected
channel by a step. The voltage step value can be set by the following command:
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
Group
Source
Syntax
[SOURce:]VOLTage[:LEVel]:DOWN[:IMMediate][:AMPLitude]
Related Commands
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement],
[SOURce:]VOLTage[:LEVel][IMMediate][:AMPLitude], [SOURce:]VOLTage[:
LEVel]:UP[:IMMediate][:AMPLitude]
[SOURce:]VOLTage[:LEVel][IMMediate][:AMPLitude]
This command is used to set the voltage level of the of the currently selected
channel. The units are V, mV or kV.
Group
Source
2-32 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual

Tektronix KEITHLEY 2200 Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2200 Series
Category	Power Supply
Language	English