Tektronix KEITHLEY 2200 Series User Manual

Commands Listed in Alphabetical Order
Returns
<mask>
Examples
STATUS:OPERATION:ENABLE 2
STATUS:OPERATION:ENABLE? might return 2.
STATus:OPERation[:EVENt]? (Query Only)
This command returns the contents of the operation event register (OEVR). After
executing this command the operation event register is reset. Details about status
registers are available in this manual. (See page 3-1, Status and Events.)
Group
Status
Syntax
STATus:OPERation[:EVENt]?
Related Commands
STATus:OPERation:INSTrument[:ENABle]?
Returns
<NR1> is a decimal integer representation o f the contents of the Operation Event
Register (OEVR), ranging from 0 to 255.
Examples
STATUS:OPERATION:EVENT? might return 2, which indicates that the summary
bit is set.
STATus:OPERation:INSTrument[:ENABle]? (Query Only)
This command queries the contents of the operation instrument enable register
(OIENR). The OIENR is an eight-bit mask register that determines which bits in
the Operation Enable Register (OENR) will affect the state of the OPER bit in
the Status Byte Register (SBR). Details about the status registers are available
in this manual. (See page 3-1, Status and Events.)
Group
Status
Syntax
STATus:OPERation:INSTrument[:ENABle]? <NR1>
Related Commands
*PSC
STATus:OPERation:INSTrument[:EVENt]?
2-38 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual

Tektronix KEITHLEY 2200 Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2200 Series
Category	Power Supply
Language	English