Unpack and inspect the instrument
To unpack and inspect the instrument:
1. Inspect the box for damage.
2. Open the top of the box.
3. Remove the documentation, standard accessories, and
optional accessories and packaging insert.
4. Carefully lift the instrument out of the box.
5. Inspect the instrument for any obvious signs of
physical damage. Report any damage to the shipping
agent immediately.
The 4200A‑SCS weighs approximately 27 kilograms
(60 lb) and requires a two‑person lift. Do not lift the
4200A‑SCS using the front bezel.
You should have received the 4200A-SCS Parameter
Analyzer with a Quick Start Guide (this document) and:
• Keyboard
• Mouse
• Power line cord
• 236-ILC-3 safety interlock cable
• 4200-TRX-2 ultra-low noise triaxial cables (two)
Refer to the packing list for additional items that might have
shipped with your instrument.
To Next Page
Loading...
