Tektronix Keithley DMM7510 Quick Start Guide

To prevent electric shock, test connections must be
congured such that the user cannot come in contact
with test leads or any device under test (DUT) that is
in contact with the conductors. It is good practice to
disconnect DUTs from the instrument before powering
the instrument. Safe installation requires proper shields,
barriers, and grounding to prevent contact with test
leads.
Do not apply more than 1000 V
PEAK
to the INPUT
terminals or more than 350 V
PEAK
to the SENSE terminals.
Failure to heed this caution may result in instrument
damage.
Do not apply more than 500 V
PEAK
between INPUT LO
and the AMPS input. Failure to observe this caution may
result in instrument damage.
Connections for testing
Test

Tektronix Keithley DMM7510 Specifications

General

Brand	Tektronix
Model	Keithley DMM7510
Category	Multimeter
Language	English