Tektronix MSO2000B Series User Manual

Analyze Wavefor
mData
3. Use the side-b
ezel menu and the
multipurpose knobs to adjust the vertical
and horizontal settings of the reference
waveform.
R1
Vertical
0.00 div
100 mV/div
Horizontal
0.00 s
4.00 s/div
Quick Tips
Selecting and Displaying Reference Waveforms. You can display all the reference waveforms at the same time. Push
the appropriate screen button to select a particular reference waveform.
Removing Reference Waveforms from the D isplay. To remove a reference waveform from the display, push the
front-panel R button to access the lower-bezel menu. Then push the associated button from the lower-bezel menu
to turn it off.
Scaling and Positioning a Reference Waveform. You can position and scale a reference waveform independently from all
other displayed w aveforms. Select the reference waveform and then adjust it with a m ultipurpose knob. You can do
this whether acquisition is running or not.
If a reference waveform is selected, scaling and repositioning of the reference waveform operates the same way
whether zoom is turned on or off.
104 MSO2000B and DPO2000B Series Oscilloscopes User Manual

Tektronix MSO2000B Series Specifications

General

Analog Channels	2 or 4
Vertical Resolution	8 bits
Digital Channels	16
Waveform Capture Rate	5, 000 wfms/s
Display	7-inch WVGA (800 x 480) color TFT LCD
Trigger Types	Edge, Pulse Width, Logic, Video
Serial Bus Analysis	I2C, SPI, CAN, LIN, RS-232/422/485/UART
Probe Interface	TekVPI
Connectivity	USB 2.0
Power Supply	100 to 240 VAC
Dimensions	368 mm
Sample Rate	1 GS/s (2 GS/s with interleaving)
Record Length	1 M points (standard), up to 10 M points (optional)