Locating Signals
Crosstalk 1, Cros stalk 2
Board label. XTALK1, XTALK2
Connector grid location. C6
Description. These two signals have significant crosstalk between them. Use them to demonstrate MagniVu.
Fast Edge
Board label. FAST_EDGE
Connector grid location. I3
Description. This is a 156 kHz capacitively coupled square wave signal witha3nsriseandfalltime.
Fast FF Clock
Board label. FAST_FF_CLK
Connector grid location. H5
Description. This is the 1.25 MHz clock input signal to a fast flip-flop.
Demo 2 Board Instruction Manua l 119
To Next Page
Loading...
