Specifications
Table 1: Analog channel input and vertical specifications (cont.)
Characteristic Description
Number of digitized
bits
8bits
Displayed vertically with 25 digitization levels (DL) per division, 10 divisions dynamic range. Only 8 vertical
divisions are displayed
"DL" is the abbreviation for "digitization level." A DL is the smallest v oltage level change that can be
resolved by the 8-bit A -D Converter. This value is also known as the LSB (least signi ficant bit).
Sensitivity range 2 mV/div to 5 V/div in a 1-2-5 sequence with probe attenuation set to 1X
Position r
ange
±4 divisions
Instrument
5 mV/div t
o 5 V/div
with an ambient
temperature of
0°Cto40
°C
(0 °F to 104 °F)
5 mV/div t
o5V/div
with an ambient
temperature of
0°Cto50
°C
(0 °F to 122 °F) <5 mV/div
DPO2024, MSO2024 DC to ≥200 MHz DC to ≥160 MHz
20 MHz
Analog bandwidth,
DC coupled
DPO2014, MSO2014,
DPO2012, MSO2012
DC to ≥100 MHz
20 MHz
The rise time is c alculated from the bandwidth of the oscilloscope. The formula accounts for the rise time
contr
ibution of the oscilloscope independent of the rise time of the signal source.
Instrument Risetime
DPO2024, MSO2024
2.1 ns
Calculated rise time
DPO2014, MSO2014,
DPO
2012, MSO2012
3.5 ns
Com
mon mode
rejection rati o (CMRR) ,
typical
100
:1 at 60 Hz, reducing to 10:1 with 50 MHz sinewave with equal Volts/div and Coupling settings
on each channel.
Lower frequency limit,
AC
coupled, typical
≤10 Hz
U
pper frequency limit,
20 MHz bandwidth
limited, typical
2
0 MHz, +50%, –0%
DC gain accuracy
±3%, 5 V/div through 10 mV/div
±4%, 5 mV/div and 2 mV/div
More than shown above when using variable gain
2 DPO2000 and MSO2000 Series Specifications and Performance Verification
To Next Page
Loading...
Need help?
General
