Tektronix RSA306 - User Manual

1
Tektronix RSA306 USB Spectrum
Analyzer
‐
Simple Demos
The Demo of the RSA306 is easy. Even you do not have signal generators, devices under test, or demo
boards, using the whip antenna provided in box, you can demodulate and listen to the signals from the
local FM broadcasting station, or see the real-time spectrum of the signals in the ISM band created by
your smart phone, and show how the RSA306 can be used in interference-hunting. The pre-compliance
measurements of electromagnetic interference (EMI) are also easy to demo. This demo guide shows
how to use the RSA306 in off-air applications.
Setup
Page 1
Installing SignalVu-PC Page 2
Activating SignalVu-PC Page 2
Setting up Live link Page 2
Over-the-air Demo:
Demo 1 FM listening Page 3
Demo 2 ISM band DPX Page 4
Demo 3 EMI spurious Page 6
The .tiq setup files are provided for each Demo. You can recall them if you have any problems with your
setup
.

Summary

Setup and Configuration

Installing and Activating SignalVu-PC

Guides through installing and activating the SignalVu-PC software for the RSA306.

Setting Up Live Link

Establishes communication between the PC and the RSA306 instrument via Live Link.

Demo 1: FM Listening

Demo 2: ISM Band DPX Analysis

Demo 3: EMI Spurious Measurement

Tektronix RSA306 Specifications