Preface
viii
TDS Family Oscilloscope Programmer Manual
Default Model
This manual documents the TDS 400A, TDS 510A, TDS 500C, TDS 600B, &
TDS 700C Digitizing Oscilloscopes. Take special note of the following
conventions:
H Some TDS models have two auxiliary channels called AUX 1 and AUX 2,
instead of CH 3 and CH 4. Some references to these channels default to
CH 3 and CH 4.
H The TDS 684B display screen appears as the default screen wherever a
display screen is illustrated in this manual.
Model References
This manual documents the TDS 400A, TDS 510A, TDS 500C, TDS 600B, &
TDS 700C Digitizing Oscilloscopes. Take note of the following conventions
used when referencing these oscilloscopes:
H The name “TDS 400A” is used when providing information common to the
TDS 420A, 430A, and TDS 460A model oscilloscopes.
H The name “TDS 500C” is used when providing information common to the
TDS 520C and TDS 540C model oscilloscopes.
H The name “TDS 600B” is used when providing information common to the
TDS 620B, TDS 644B, TDS 680B, and TDS 684B model oscilloscopes.
H The name “TDS 700C” is used when providing information common to the
TDS 724C, TDS 754C, and TDS 784C model oscilloscopes.
To Next Page
Loading...
Need help?
General
