Tektronix TDS 500C Programmer's Manual

TDS Family Oscilloscope Programmer Manual
vii
Preface
This programmer manual covers the TDS 420A, 430A, 460A, 510A, 520C,
540C, 620B, 644B, 680B, 684B, 724C, 754C, & 784C. It also covers Advanced
DSP Math (optional on the TDS420A, 430A, 460A, 510A, 520C, 540C, 620B,
& 680B), the RS-232/Centronics Interface (optional on the TDS 420A, 430A,
460A, 510A, 520C, 540C, 620B, & 640B), and the Option 05 Video Trigger.
This manual provides information on operating your oscilloscope using the
General Purpose Interface Bus (GPIB) interface.
Related Manuals
Table i lists other documentation for the TDS 420A, 430A, 460A, 510A, 520C,
540C, 620B, 644B, 680B, 684B, 724C, 754C, & 784C digitizing oscilloscopes.
Table i: Other Documentation
Manual Tek Part Number
  
TDS 420A, 430A, 460A, & 510A 070–9701–XX
TDS 500C, 600B, & 700C 070–9869–XX
TDS 510A, 500C, 600B, & 700C Option 05 Video Trigger 070–8748–XX
TDS Reference
TDS 420A, 430A, 460A, & 510A 070–9758–XX
TDS 500B, 600B, & 700A 070–9382–XX
TDS Performance Verification
TDS 420A, 430A, & 460A 070–9705–XX
TDS 510A 070–9706–XX
TDS 500C, 600B, & 700C 070–9874–XX
TDS Service Manual
TDS 420A, 430A, & 460A 070–9703–XX
TDS 510A 070–9704–XX
TDS 500C, 600B, & 700C 070–9875–XX

Tektronix TDS 500C Specifications

General

Brand	Tektronix
Model	TDS 500C
Category	Test Equipment
Language	English