Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–109
might return the string , showing that the DESER contains the binary
value 10111010.
DIAg:RESUlt:FLAg? (Query Only)
Returns the pass/fail status from the last diagnostic test sequence execution. The
DIAg:RESUlt:LOG? query can be used to determine which test(s) has failed.
Calibration and Diagnostic
DIAg:RESUlt:LOG?
indicating that all of the selected diagnostic tests have passed.
indicating that at least one of the selected diagnostic tests has failed.
returns either or .
DIAg:RESUlt:LOG? (Query Only)
Returns the internal results log from the last diagnostic test sequence execution.
The list contains all modules and module interfaces that were tested along with
the pass/fail status of each.
Calibration and Diagnostic
DIAg:RESUlt:FLAg?
Group
Related Commands
Syntax
Returns
Examples
Group
Related Commands
Syntax
To Next Page
Loading...
Need help?
General
