Command Descriptions
2–190
TDS Family Oscilloscope Programmer Manual
NOTE. The *LRN? query always returns a string including command headers,
regardless of the setting of the HEADer command. This is because the returned
string is intended to be sent back to the digitizing oscilloscope as a command
string. The VERBose command can still be used normally to specify whether the
returned headers should be abbreviated.
*LRN?
a partial response might look like this:
:ACQUIRE:STATE 1;MODE SAMPLE;NUMENV 10;NUMAVG 16;
REPET 1;STOPAFTER RUNSTOP;:DIAG:LOOP:OPTION ONCE;
COUNT 1;:DIAG:STATE HALT;:HEADER 1;:VERBOSE 1;
:CURSOR:FUNCTION OFF;VBARS:UNITS SECONDS;
POSITION1 1.00E-6;POSITION2 9.00E-6;SELECT CURSOR1;
MASK? (Query Only)
TDS 500C & 700C Only
Returns the state of all settable mask parameters.
Mask
MASK?
MASK
?
<NR3>
Mask?
might return
:MASK:MASK1:POINTSP
11.400000000E+0,12.531328321E+0,8.820e+01,1.253e+01,8.840e+01,0.0
E+0,1.120e+01,0.0E+0;:MASK:MASK2:POINTSP
22.800000000E+0,50.125313283E+0,3.820e+01,6.617e+01,6.140e+01,6.6
17e+01,7.680e+01,5.013e+01,6.140e+01,3.383e+01,3.820e+01,3.383e+0
1;:MASK:MASK3:POINTSP
11.400000000E+0,87.719298246E+0,8.820e+01,8.772e+01,8.840e+01,1.0
03e+02,1.120e+01,1.003e+02;:MASK:MASK4:POINTSP
0.0E+0,0.0E+0;:MASK:MASK5:POINTSP
0.0E+0,0.0E+0;:MASK:MASK6:POINTSP
0.0E+0,0.0E+0;:MASK:MASK7:POINTSP
Examples
Group
Syntax
Returns
Examples
To Next Page
Loading...
Need help?
General
