Command Descriptions
2–192
TDS Family Oscilloscope Programmer Manual
following standards, offset will not be adjusted if this feature is OFF: T1.102,
DS–0, E2, E2, and E3. For all other standards, offset will be adjusted regardless
of how this feature is set.
Mask
or = 0 takes away a standard mask autoset’s freedom to adjust vertical
offset for standard masks. This is the default value.
or 0 gives a standard mask autoset the freedom to adjust vertical
offset for standard masks.
gives a standard mask autoset the freedom to adjust vertical offset for standard
masks.
MASK:COUNt
TDS 500C & 700C Only
Zeros the counts for the masks.
Mask
zeros the mask counts.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments