Command Descriptions
2–202
TDS Family Oscilloscope Programmer Manual
DS0Double means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS–0 Double Pulse standard (64 kb/s).
DS0Contra means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS–0 Data Pulse, Contradirectional standard (64 kb/s).
DS0Timing means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS–0 Timing Pulse, Contradirectional standard (64 kb/s).
E1Symmetrical means delete any user defined masks and then create masks 1 ..
2 as specified by the E1 Symmetrical Pair standard (2.048 Mb/s).
E1Coax means delete any user defined masks and then create masks 1 .. 2 as
specified by the E1 Coaxial Pair standard (2.048 Mb/s).
E2 means delete any user defined masks and then create masks 1 .. 2 as specified
by the E2 standard (8.448 Mb/s).
E3 means delete any user defined masks and then create masks 1 .. 2 as specified
by the E3 standard (34.368 Mb/s).
E4_0 means delete any user defined masks and then create masks 1 .. 2 as
specified by the E4 Binary 0 standard (139.26 Mb/s).
E4_1 means delete any user defined masks and then create masks 1 .. 2 as
specified by the E4 Binary 1 standard (139.26 Mb/s).
E5 means delete any user defined masks and then create masks 1 .. 2 as specified
by the E5 CEPT standard (565 Mb/s).
STM1E_0 means delete any user defined masks and then create masks 1 .. 2 as
specified by the G.703 Binary 0 standard (155.52 Mb/s). The SONET standard
GR–253–CORE calls this mask STS–3. ANSI standard T1.102 has STS–3 eye
pattern standards.
STM1E_1 means delete any user defined masks and then create masks 1 .. 2 as
specified by the G.703 Binary 1 standard (155.52 Mb/s). The SONET standard
GR–253–CORE calls this mask STS–3. ANSI standard T1.102 has STS–3 eye
pattern standards.
DS1 means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS1 standard (1.544 Mb/s).
DS1A means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS1A standard (2.048 Mb/s).
DS1C means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS1C standard (3.152 Mb/s).
DS2 means delete any user defined masks and then create masks 1 .. 2 as
specified by the DS2 standard (6.312 Mb/s).
To Next Page
Loading...
Need help?
General
