Command Descriptions
2–264
TDS Family Oscilloscope Programmer Manual
Miscellaneous
TEKSecure
TEKSecure
TIMe
Sets or queries the time that the digitizing oscilloscope can display.
Miscellaneous
DATE, DISplay: CLOCk
TIMe <QString>
TIMe?
<QString>
TIMe
<Space>
?
<QString> is a date in the form hh:mm:ss".
hh refers to the hour number from 01 to 24.
mm refers to the minute number in the hour from 00 to 59.
ss refers to the seconds number in the minute from 00 to 59.
There must be a colon after the hh and after the mm.
Use two digits for each of the hh, mm, and ss.
TIME "01:24:00"
specifies that the time is set to 01:24 AM.
TRIGger
Forces a trigger event to occur, and the TRIGger query returns the current trigger
parameters.
Group
Syntax
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
