Command Descriptions
2–64
TDS Family Oscilloscope Programmer Manual
APPMenu?
APPMenu
<Space>
?
ACTivate
ACTivate displays the Application menu. Use the CLEARMenu command to
deactivate the Application menu.
Once the Application menu is activated, whenever a front-panel menu button is
pressed an event is generated that tells which button was pressed. See page 3–17
for event codes.
Menu button presses will also generate Service Requests when the URQ bit is
enabled in DESER and ESER and the ESB bit is enabled in SRER. See page 3–1
for a complete discussion of the use of these registers.
APPMENU ACTIVATE
displays the application menu.
APPMenu:LABel
Removes all user-defined Application menu button labels from the display. The
APPMenu:LABel? query returns all the current label settings.
Application Menu
APPMenu:LABel CLEar
APPMenu:LABel?
CLEar
APPMenu
:
LABel
?
<Space>
CLEar removes the main and side menu button labels from the display. Front-pa-
nel bezel button presses will continue to generate events.
APPMENU:LABEL CLEAR
clears the user-defined menu labels from the display.
Arguments
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
