TDS 620A, 640A, & 644A User Manual
3Ć1
Overview
This section describes the details of operating the digitizing oscilloscope. It
contains an alphabetical list of tasks you can perform with the digitizing
oscilloscope. Use this section to answer specific questions about instrument
operation. These tasks include:
H
Probe Cal
Probe Compensation
Probe Selection
Pulse Triggering
Remote Communication
Saving and Recalling Setups
Saving and Recalling Wave-
forms
Selecting Channels
Signal Path Compensation
Status
Triggering
Vertical Control
Waveform Differentiation
Waveform Integration
Waveform Math
Zoom
Acquisition Modes
Autoset
Color
Cursor Measurements
Delayed Triggering
Display Modes
Edge Triggering
Fast Fourier Trans-
forms
File System
Hardcopy
Help
Horizontal Control
Limit Testing
Logic Triggering
Measurement System
Many of these tasks list steps you perform to accomplish the task. You should
read
Conventions
on page ii of
Welcome
before reading about these tasks.
To Next Page
Loading...
