Tektronix TDS 520B Programming Manual

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–87
DATa
Sets or queries the format and location of the waveform data that is transferred
with the CURVe command. Since DATa:DESTination and DATa:TARget are
equivalent, only DATa:DESTination is returned by the DATa? query.
Waveform
CURVE, WAVFrm
DATa { INIT | SNAp }
DATa?
DATa
<Space>
?
INIT
SNAp
INIT initializes the waveform data parameters to their factory defaults.
SNAp sets DATa:STARt and DATa:STOP to match the current vertical bar cursor
positions.
DATA SNAP
assigns the current position of the vertical bar cursors to DATA:START and
DATA:STOP.
DATA?
might return the string :DATA:ENCDG RPBINARY;DESTINATION REF4; SOURCE
REF4;START 1;STOP 500;WIDTH 2
DATa:DESTination
Sets or queries the reference memory location for storing waveform data that is
transferred into the digitizing oscilloscope by the CURVe command. This
command is identical to the DATa:TARget command.
Waveform
Group
Related Commands
Syntax
Arguments
Examples
Group

Tektronix TDS 520B Specifications

General

Brand	Tektronix
Model	TDS 520B
Category	Test Equipment
Language	English