Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–131
FILESystem:OVERWrite { ON | OFF | <NR1> }
FILESystem:OVERWrite?
<Space>
ON
?
OFF
<NR1>
:
FILESystem
OVERWrite
ON or <NR1> 0 turns on the file overwrite protection.
OFF or <NR1> = 0 turns off the file overwrite protection.
FILESYSTEM:OVERWRITE OFF
lets you overwrite existing files.
FILESYSTEM:OVERWRITE?
might return 0 indicating you cannot overwrite existing files.
FILESystem:PRInt (No query form)
File System Only
Prints a named file to the named port.
File system
FILESystem:PRInt <filepath>,{ GPIb | RS232 | CENtronics }
CENtronics
RS232
GPIb
:
PRInt
FILESystem
<file path>
,
<file path> is a quoted string that defines the file name and path. Input the file
path using the form <drive>/<dir>/<filename>. <drive> and one or more
<dir>s are optional. If you do not specify them, the TDS will print the file in the
current directory. <filename> stands for a filename of up to 8 characters and can
be followed by a period (“.”) and a 3-character extension.
GPIb specifies that the hardcopy is sent out the GPIB port.
Syntax
Arguments
Examples
Group
Syntax
Arguments
To Next Page
Loading...
Need help?
General
