Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–243
# $ $ %
or = 0 removes the message window from the screen.
or 0 displays the message window and its contents on the screen.
The size of the window is defined by MESSage:BOX.
NEWpass (No Query Form)
Changes the password that enables access to password protected data. The
PASSWord command must be successfully executed before using this command
or an execution error will be generated.
Miscellaneous
PASSWord, *PUD
is the new password. The password can include up to 10 characters.
"!
creates a new password for accessing the user protected data.
*OPC
Generates the operation complete message in the Standard Event Status Register
(SESR) when all pending operations finish. The *OPC? query places the ASCII
character “1” into the output queue when all pending operations are finished. The
*OPC? response is not available to read until all pending operations finish. For a
Syntax
Arguments
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
