Command Descriptions
2–80
TDS Family Oscilloscope Programmer Manual
CURSOR?
might return :CURSOR:FUNCTION OFF;VBARS:UNITS SECONDS;
POSITION1 500.0E-6;POSITION2 4.50E-3;SELECT CURSOR1;
:CURSOR:HBARS:POSITION1 3.20E+0;POSITION2 -3.20E+0;
SELECT CURSOR1 as the current cursor settings.
CURSor:FUNCtion
Selects and displays the cursor type. Cursors are attached to the selected
waveform. This command is equivalent to setting Function in the Cursor menu.
Cursor
SELect:CONTROl
CURSor:FUNCtion { HBArs | OFF | VBArs | PAIred }
CURSor:FUNCtion?
FUNCtion
CURSor :
PAIred
<Space>
?
VBArs
OFF
HBArs
HBArs specifies horizontal bar cursors that measure volts.
OFF removes the cursors from the display.
VBArs specifies vertical bar cursors that measure time.
PAIred specifies paired cursors that measure both time and volts.
CURSOR:FUNCtion VBARS
selects vertical bar type cursors.
CURSor:HBArs? (Query Only)
Returns the current settings for the horizontal bar cursors.
Examples
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
