Tutorial
TDS 500C, TDS 600B, & TDS 700C User Manual
2–31
To recall the setup, press SAVE/RECALL SETUP ➞ Recall Saved Set-
up (main) ➞ Recall Setup (side) for the setup location you used in the last
exercise. The positive width measurement is now removed from the display
because you selected it after you saved the setup.
The step just performed completes the examples. You can restore the default
settings by pressing SETUP ➞ Recall Factory Setup (main) ➞ OK Confirm
Factory Init (side).
Recall a Setup
To Next Page
Loading...
