'+ #*!
1Ć13
''#) ')' () (
This subsection lists the various warranted characteristics that describe the
TDS 620A, 640A, & 644A Digitizing Oscilloscopes. Electrical and
environmental characteristics are included.
Warranted characteristics are described in terms of quantifiable performance
limits which are warranted.
NOTE
In these tables, those warranted characteristics that are checked in
the procedure Performance Verification, found in Section 1, appear
in boldface type under the column ".
As stated above, this subsection lists only warranted characteristics. A list of
typical characteristics starts on page 1Ć19.
The electrical characteristics found in these tables of warranted characterisĆ
tics apply when the oscilloscope has been adjusted at an ambient temperaĆ
ture between +20_ C and +30_ C, has had a warmĆup period of at least 20
minutes, and is operating at an ambient temperature between 0_ C and
+50_ C (unless otherwise noted).
!-/.''#) ')' () ( 0 #! &* ( ) $# ,()"
"
(' %) $#
*', #
±1.5%.
(For all sensitivities from 2 mV/div to 10 V/div and offsets from 0 to
±100 V)
At 1 mV/div ± 2.0%
*', ()
$!)( + )) #
1 mV/div - 99.5 mV/div
100 mV/div - 995 mV/div
1 V/div - 10 V/div
() *',
±(0.2% × Net Offset
ą+ 1.5 mV + 0.6 div)
±(0.35% × Net Offset
ą+ 15 mV + 0.6 div)
±(0.35% × Net Offset
ą+ 150 mV + 0.6 div)
'$'"#
$# ) $#(
To Next Page
Loading...
