Command Descriptions
2ā238
TDS Family Oscilloscope Programmer Manual
īīīīīī īīīīīīīīīīīīīīī!ī īīīīī"!īīīī # īīīī $ īīī$ī%
īīīīīī īīīīīīīīīīīīīīī!ī īīīīī"!īīīīī
īīī!ī ī
īīīīīīī
ī
īīīī
ī
īīī
īīīīīī ī
ī
īīīīī
īīīī
īīī"! ī
ī
īīī
ī
īīīī specifies logic high.
īīī specifies logic low.
ī specifies a do not care state.
īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī īīī
sets the main logic trigger input to logic low for channel 4 when the logic class is
set to īīī!ī ī.
īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī
might return ī, indicating that the logic input for channel 4 is do not care.
TRIGger:MAIn:LOGIc:PATtern:WHEn
TDS 5XXA, 6XXA, & 7XXA Only
Sets or queries a condition for generating a main logic pattern trigger.
Trigger
īīīīīī īīīīīīīīīīīīīīī!ī īīīīīī # īīīī $ īīīīī $ īīīīīīīī $
īīīīīīīī %
īīīīīī īīīīīī īīīīīī īīī!ī īī īīīīī
Syntax
Arguments
Examples
Group
Syntax