Tektronix TDS 620A - Page 279

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–261
TRIGGER:MAIN:PULSE:SLEWRATE:THRESHOLD:LOW 50E-3
sets the lower limit of the pulse slew rate trigger to 50 mV.
TRIGger:MAIn:PULse:SLEwrate:WHEn
TDS 684A & 7XXA Only
Sets or queries whether to check for a slewing signal that is faster or slower than
the specified delta time. This is equivalent to to selecting Trigger When from
the main Trigger’s Slew Rate menu and entering a value in the resulting side
menu’s Trig if Less Than or Trig if Greater Than items.
Trigger
TRIGger:MAIn:PULse:SLEwrate:WHEN { FASTERthan | SLOWERthan }
TRIGger:MAIn:PULse:SLEwrate:WHEN?
FASTERthan
TRIGger :
:
PULse
MAIn :
:
WHEN
SLEwrate
SLOWERthan
<Space>
?
FASTERthan sets the trigger to occur when the slew is faster than the set
volts/second rate.
SLOWERthan sets the trigger to occur when the slew is slower than the set
volts/second rate.
TRIGGER:MAIN:PULSE:SLEWRATE:WHEN FASTERTHAN
sets the slew rate trigger to work when the slew is faster than the set volts/second
rate.
TRIGger:MAIn:PULse:SOUrce
TDS 5XXA, 6XXA, & 7XXA Only
Sets or queries the source for the main pulse trigger. This is equivalent to
selecting the source in the Pulse Runt Source side menu.
Trigger
Examples
Group
Syntax
Arguments
Examples
Group