Tektronix TDS Series - Page 328

Command Descriptions
2–308
TDS Family Oscilloscope Programmer Manual
ZOOm:GRAticule
TDS 400A, 500B, 600B, & 700A Only
Selects between the upper and lower graticule for use by the zoom preview state.
If you select the lower graticule, horizontal and vertical knob changes will affect
the underlying acquisition system. If you select the upper graticule, horizontal
and vertical knob changes will affect the zoom factors.
Zoom
ZOOm:GRAticule { LOWEr | UPPer }
ZOOm:GRAticule?
<Space>
?
LOWEr
GRAticule
UPPer
ZOOm
:
LOWEr selects the lower graticule.
UPPer selects the upper graticule.
ZOOM:GRATICULE?
might return UPPER, indicating that the upper graticule is selected.
ZOOm:HORizontal:LOCk
Specifies the waveforms that the horizontal zoom parameters affect. This is
equivalent to setting Horizontal Lock in the Zoom side menu.
Zoom
ZOOm:HORizontal:LOCk { ALL | LIVe | NONe }
ZOOm:HORizontal:LOCk?
Group
Syntax
Arguments
Examples
Group
Syntax