Tektronix TDS Series - Page 329

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–309
<Space>
?
ZOOm :
:
LIVe
NONe
LOCk
HORizontal
ALL
LIVe specifies that all live (CH<x>) waveforms will be horizontally positioned
and scaled together.
NONe specifies that only the selected waveform is positioned and scaled using the
horizontal zoom parameters.
ALL specifies that all (CH<x>, Ref<x>, Math<x>) waveforms will be horizontal-
ly positioned and scaled together.
ZOOM:HORIZONTAL:LOCK LIVE
specifies that all live waveforms are positioned and scaled together.
ZOOM:HORIZONTAL:LOCK?
returns either ALL, LIVE, or NONE.
ZOOm:HORizontal:POSition
Sets or queries the horizontal position of zoomed waveforms. The setting of the
ZOOm:HORizontal:LOCk command determines the waveforms affected. For
example, if ZOOm:HORizontal:LOCk is set to LIVe then only live (as opposed
to reference and math) waveforms are affected.
Zoom
ZOOm:HORizontal:POSition <NR3>
ZOOm:HORizontal:POSition?
?
<Space> <NR3>
ZOOm
:
:
HORizontal POSition
<NR3> is from 0 to 100, and is the percent of the waveform that is to the left of
screen center when the zoom factor is 1x or greater.
Arguments
Examples
Group
Syntax
Arguments