To Next Page

To Previous Page

Appendix B: Factory Setup

TDS200/1000/2000 Series Oscilloscope Programmer Manual

B−3

TDS210 and TDS220 Oscilloscopes

Items enclosed in < > brackets are present only when the TDS2MM

module is installed.

:HEADER 1;(:VERBOSE 1;)

:DATA:ENCDG RIBINARY;DESTINATION REFA;SOURCE CH1;

START 1;STOP 2500;WIDTH 1;

(:LOCK NONE;)

:DISPLAY:FORMAT YT;STYLE VECTORS;PERSISTENCE 0;

CONTRAST 50;

:ACQUIRE:MODE SAMPLE;NUMAVG 16;STATE 1;

STOPAFTER RUNSTOP;

:CH1:PROBE 10;SCALE 1.0E0;POSITION 0.0E0;

COUPLING DC;BANDWIDTH OFF;<INVERT OFF;>

:CH2:PROBE 10;SCALE 1.0E0;POSITION 0.0E0;

COUPLING DC;BANDWIDTH OFF;<INVERT OFF;>

:HORIZONTAL:VIEW MAIN;

MAIN:SCALE 5.0E−4;POSITION 0.0E0;

:HORIZONTAL:DELAY:SCALE 5.0E−5;POSITION 0.0E0;

:TRIGGER:MAIN:MODE AUTO;TYPE EDGE;

HOLDOFF:VALUE 5.0E−7;

:TRIGGER:MAIN:EDGE:SOURCE CH1;COUPLING DC;

SLOPE RISE;:TRIGGER:MAIN:VIDEO:SOURCE CH1;

SYNC LINE;POLARITY NORMAL;

:TRIGGER:MAIN:LEVEL 0.0E0;

:SELECT:CH1 1;CH2 0;MATH 0;REFA 0;REFB 0;

:CURSOR:FUNCTION OFF;SELECT:SOURCE CH1;

:CURSOR:VBARS:UNITS SECONDS;

POSITION1 −2.0E−3; POSITION2 2.0E−3;

:CURSOR:HBARS:POSITION1 −3.2E0; POSITION2 3.2E0;

:MEASUREMENT:MEAS1:TYPE NONE;SOURCE CH1;

:MEASUREMENT:MEAS2:TYPE NONE;SOURCE CH1;

:MEASUREMENT:MEAS3:TYPE NONE;SOURCE CH1;

:MEASUREMENT:MEAS4:TYPE NONE;SOURCE CH1;

:MEASUREMENT:IMMED:TYPE PERIOD;SOURCE CH1;

Tektronix TDS200 Series Programmer's Manual

Other manuals for Tektronix TDS200 Series