Tektronix TDS200 Series - Page 113

Command Descriptions
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−95
HORizontal:DELay? (Query Only)
Returns all settings for the window time base. The commands
HORizontal:DELay:SECdiv and HORizontal:DELay:SCAle are
equivalent, so only the values for HORizontal:DELay:SCAle are
returned.
Horizontal
HORizontal:DELay?
All settings for the window time base
HORizontal:DELay?
might return :HORIZONTAL:DELAY:POSITION 0.0E0;
SCALE 5.0E–4
HORizontal:DELay:POSition
Sets or queries the window time base horizontal position. This
command is equivalent to adjusting the Horizontal Position when
Window Zone or Window is selected from the Horizontal menu.
Horizontal
HORizontal:DELay:POSition <NR3>
HORizontal:DELay:POSition?
Group
Syntax
Returns
Examples
Group
Syntax