Command Descriptions
2−70
TDS200/1000/2000 Series Oscilloscope Programmer Manual
Table 2−24: DATa and WFMPre parameter settings
WFMPre settings
DATa:ENCdg setting
:ENCdg
:BN_Fmt :BYT_Or
ASCIi ASC N/A N/A
RIBinary BIN RI MSB
RPBinary BIN RP MSB
SRIbinary BIN RI LSB
SRPbinary BIN RP LSB
DATa:ENCdg RPBINARY
sets the data encoding format to be positive integer where the most
significant byte is transferred first.
DATa:ENCdg?
might return SRPBINARY for the format of the waveform data.
WFMPre:ENCdg, WFMPre:BN_Fmt, WFMPre:BYT_Or
DATa:SOUrce
Sets or queries which waveform will be transferred from the
oscilloscope by the CURVe?, WFMPre?, or WAVFrm? queries. You
can transfer only one waveform at a time.
Waveform
DATa:SOUrce <wfm>
DATa:SOUrce?
Examples
Related Commands
Group
Syntax
To Next Page
Loading...
