Telco GCE6215 - Reviewing, Calling Back and Deleting Incoming Numbers

31
4. When finished, press key again.
Pre-dialing function
1. When the handset is on the base, dial the desired number.
2. If there are mistakes, use the DEL key to edit.
3. Press key or pick up the handset and the number will be dialed
automatically.
Redial
1. Pick up the handset or press key,
2. Press REDIAL key, the last dialed number will be dialed again
REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS
Reviewing
In on-hook state, press UP/+ or DOWN/– key to scroll and review the
numbers.
Deleting
1. When the desired number is shown, press DEL key, the number is
deleted.
2. Press and hold DEL key for 3 seconds, all the incoming numbers are
deleted.
Calling back
1. Scroll to the desired number, press key or REDIAL key, or pick
up the handset, and the number is dialed out, or
2. Press REDIAL key twice, the telephone will dial the long-distance
code firstly, then dial back this numbers.