37
2. Press ”*” and the paging number that was set in another
telephone unit.
3. The unit rings, pick up its handset or press key to
answer the incoming call.
Notes:
Please use same series phones to transfer as above operation. Any
special services starting with “*” offered by your Telephone company
may not function properly.
To get the best effect of this function, you should load the batteries
before using
ANTI-DIALING FROM PARALLEL PHONES FUNCTION
1. In on-hook state, press and hold #/= key for 3 seconds, LCD displays
SPI OFF
2. Press #/= key again, LCD displays SPI ON ,
3 . Press SET key to confirm and exit.
When the anti-steal dialing is set to ON, users who want to dial using an
extension via the same line will hear a “DI-DI, DI-DI” beep continuously
and will not be allowed to make a call.
SETTING RINGING TONE AND ADJUST RINGING VOLUME
There are 16 kinds of ringing tone for selection:
1. In on-hook state, press HD/RING key once, LCD displays ring
02db3
2. Press HD/RING key continually to select the desired ringing
3. Press UP/+ or DOWN/– key to set ringing volume.
To Next Page
