Telco GCE6215 - Setting Menu

33
1. In on-hook state, press and hold ALARM/P key for 3 seconds, LCD
display DATE ON
2. Press ALARM/P key again, LCD displays DATE OFF,
3. Press SET key to quit.
Note: DATE OFF: Does not allow real time auto
adjustment.
SETTING MENU
Setting date & time
1. In on-hook state, press SET key, LCD display SET 1 DATE, and
press SET key again, the value for the year flashes.
2. Press UP/+ or DOWN/– key to edit the year.
3. Press SET key to confirm and enter the next value month setting.
4. Repeat the above steps for month setting.
5. Repeat the above steps for date and time setting.
Setting Local Area Code
1. In on-hook state, press SET key and press UP/+ key, LCD display
SET 2 CODE, and press SET key again, LCD displays CODE 0 ----
and the long-distance code “0” flashes,
2. Press UP/+ or DOWN/– key to edit the flashing code,
3. Press SET key to confirm and enter the next flashing code setting.
4. Repeat the above steps for the rest code setting.
➢ Setting Long Distance Code
1. In on-hook state, press SET key and press UP/+ key twice, LCD
displays SET 3 LCODE, press SET key again, LCD displays --------
-------0 or preset codes, press DEL key to delete it.