36
5. When the last digit of the secret code is #, the telephone will
activate remote monitor function.
Usage
Secret code: When caller call this telephone, he/she will hear the usual
ringing tone (when the line gets through) three times or four times.
However, the telephone unit will not ring. The caller will hear a short “di”
sound, which means that the caller needs to key in the secret code.
Once the caller keys in the correct code, the telephone
unit will ring. Press key or pick up the handset to have the
conversation with the caller.
Remote monitor: If the last digit of the secret code is #, after the
caller keys in the correct secret code, the telephone unit will go into
hands free mode automatically and quit after about 50 seconds.
If the caller keys in the wrong code, he/she will have to call again
and key in the correct secret PIN code.
Note: This function is useful only when the telephone ringer is set to
OFF. The caller must know the secret code in order to dial through
the line.
PAGE AND TRANSFER BETWEEN PARALLEL PHONES
Setting paging number
1. In on-hook state, press and hold SET key, LCD displays EL--
2. Key in “*” and the paging number (example “*1” and ”*2” ), press
DEL key can delete.
3. Press SET key to confirm and exit.
Transferring the line from paralleled phones:
1. When a call comes, use one of paralleled phones to answer.
To Next Page
