Telecom Behnke a Series User Manual

GB
Manual Door intercom devices a / b series 20 / 30 / 40 / 50 / 20-0028A/-0028B
Configurations and Set-up
GB
76 www.behnke-online.com
Code Parameter Conrmation
19 = activation according to a schedule
(or manually, cf. configuration step 44) (V1.30 or later)
20 = activated after answering an emergency call (according to EN 81-70)
(V1.40 or later)
21 = activated when speaking in two-way communication (V1.42 or later)
22 = activated when listening in two-way communication (V1.42 or later)
23 = controls the additional relay board (V 1.51 or later)
24 = IP video routing (V1.61 or later)
#
#
#
#
#
#
13
Relay 2 activation time: Default setting: 5
1 = 1 second
2 = 2 seconds
:
30 = 30 seconds (up to V1.60)
:
90 = 90 seconds (V1.61 or later)
#
#
:
#
14
15
Relay 2 activation codes: Default setting: cf. configuration step 12
1. Activation code
2. Activation code
Activation codes consist of digits only and each activation code may be up
to 4 digits long.

Telecom Behnke a Series Specifications

General

Brand	Telecom Behnke
Model	a Series
Category	Intercom System
Language	English