To Next Page
M
Michael HaasAug 4, 2025
What to do if my Telecrane F21-12S batteries are dead?
- JJason BowmanAug 4, 2025
If the batteries in your Telecrane Remote Control are dead, replace them.
What to do if my Telecrane F21-12S batteries are dead?
If the batteries in your Telecrane Remote Control are dead, replace them.
What to do if the Telecrane F21-12S pushbutton is shorted?
If the pushbutton is shorted, replace the encoder module and perform the function setting procedure.
How to fix Telecrane F21-12S E2PROM memory malfunction?
If the E2PROM memory in the encoder module is malfunctioning and cannot be read or written, replace the encoder module and perform the function setting procedure.
What to do if E2PROM in Telecrane F21-12S doesn’t have function settings?
If the E2PROM in the encoder doesn’t have function settings or the settings are incomplete, perform the function setting procedure.
Please carefully read the manual before installing and operating this device.
General safety precautions for operating the equipment.
Steps to follow in case of an emergency situation.
Safety precautions to observe during the installation process.
Step-by-step procedure for installing the receiver.
Initial steps to power on and begin using the transmitter.
Step-by-step guide to changing the transmitter's operating frequency.
Procedure to enter a password for security.
Setting the password function for security.
Daily inspection procedures for safety and operation.
How the self-diagnostics circuit works and detects malfunctions.
General| Brand | Telecrane |
|---|---|
| Model | F21-12S |
| Category | Remote Control |
| Language | English |
