To Next Page
M
mackalanAug 9, 2025
What to do if my Telecrane F21-12D Remote Control batteries are dead?
- QqcarneyAug 9, 2025
If the batteries in your Telecrane Remote Control are dead, replace them.
What to do if my Telecrane F21-12D Remote Control batteries are dead?
If the batteries in your Telecrane Remote Control are dead, replace them.
What to do if the Telecrane F21-12D pushbutton is shorted?
If the pushbutton is shorted, replace the encoder module and perform the function setting procedure.
How to fix Telecrane Remote Control E2PROM memory malfunction?
If the E2PROM memory in the encoder module is malfunctioning and cannot be read or written, replace the encoder module and perform the function setting procedure.
What to do if E2PROM in Telecrane F21-12D Remote Control doesn’t have function settings?
If the E2PROM in the encoder doesn’t have function settings or the settings are incomplete, perform the function setting procedure.
General safety and operational guidelines for the equipment.
Detailed safety precautions for operating the remote control system.
Steps to follow in case of an emergency situation with the equipment.
Detailed specifications of the transmitter unit.
Detailed specifications of the receiver unit.
Safety precautions to follow before and during the installation process.
Step-by-step guide for installing the receiver unit.
Guidance on connecting the correct power source to the receiver.
Ordered installation steps and important post-installation checks.
Procedures for powering on the transmitter and initial setup.
How the receiver unit becomes active upon receiving transmitter data.
How to control acceleration and deceleration using specific buttons.
Daily checks to ensure the safety and proper operation of the system.
Overview of the self-diagnostic system and malfunction signals.
How the built-in self-diagnostics detect and report malfunctions.
General| Brand | Telecrane |
|---|---|
| Model | F21-12D |
| Category | Remote Control |
| Language | English |
