To Next Page
C
Charles GarciaAug 9, 2025
What to do if my Telecrane F21-6S batteries are dead?
- WWilliam WilliamsAug 9, 2025
If the batteries in your Telecrane Remote Control are dead, replace them.
What to do if my Telecrane F21-6S batteries are dead?
If the batteries in your Telecrane Remote Control are dead, replace them.
What to do if the Telecrane Remote Control pushbutton is shorted?
If the pushbutton is shorted, replace the encoder module and perform the function setting procedure.
How to fix Telecrane Remote Control E2PROM memory malfunction?
If the E2PROM memory in the encoder module is malfunctioning and cannot be read or written, replace the encoder module and perform the function setting procedure.
What to do if E2PROM in Telecrane Remote Control doesn’t have function settings?
If the E2PROM in the encoder doesn’t have function settings or the settings are incomplete, perform the function setting procedure.
Key technical details including voltage, temperature, and relay ratings.
Instructions for receiver installation, dimensions, and wire connections.
Steps for properly inserting AA alkaline batteries into the transmitter.
Step-by-step procedures for starting and operating F21/F24 models.
Information on battery indicators, LED status, and receiver fuse replacement.
Critical steps to follow in case of an emergency.
Solutions for common installation issues like dead receivers or relay problems.
Details on auto-shut-down settings and pushbutton function programming.
How to use and adjust the internal horn feature on specific models.
Guide to selecting the right F21 and F24 Telecrane remote control model.
Wiring diagrams for F21 and F24 series receivers.
General| Model Type | F21-6S |
|---|---|
| Number of Channels | 6 |
| Frequency | 433 MHz |
| Transmitter Type | Handheld |
| Weight | 0.5 kg |
| Transmitter Power | 10 mW |
| Enclosure Protection | IP65 |
| Channels | 6 |
| Control Distance | 100 meters |
| Power Supply | 12V DC |
