38
Instance:
2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number
will be sent to private SIP server.
3T rule: If the call starts with 3, the first 3 will be deleted, and the rest number
with be sent to public SIP server.
123 rule: Dial 123 and will send 06332221015 to your server. It is used as
speed dial function.
0T rule: If the call begins with 0, the first 0 will be replaced by 86. It means that
if you dial 06332221015 and AG-188 will send 866332221015 to your server.
11 rule: when you dial 11, the call with send to 192.168.0.11, suit for LAN
application without set up a sip server.
4.4 Voice mail
When there are new messages, the MWI will give out prompt according to the
options of "Message Waiting Indication" in web page layout.
If “Disable” is selected, MWI function is disabled, even if received NOTIFY
message from the server indicating new voicemail, phone will not prompt;
If “Enable (Subscribe)” is selected, MWI function is enabled and Subscribe will
be sent, if the server sends NOTIFY message indicating new voicemail received,
MWI LED will blink to prompt;
If “Enable (No Subscribe)” is selected, MWI is enabled, but Subscribe will not
be sent, if the server sends NOTIFY message indicating new voicemail received,
To Next Page
Loading...