Teledyne PIXIS

To Next Page

To Previous Page

Instruments.

Printed in the United States of America.

IntelliCal, LightField, and PVCAM are registered trademarks of Teledyne Digital Imaging US, Inc.

LabVIEW is a registered trademark of National Instruments, Inc.

LEMO is a registered trademark of INTERLEMO HOLDING SA

Nikon is a registered trademark of Nikon, Inc.

Scientific Imaging ToolKit and SITK are trademarks of R Cubed Software Consultants, LLC.

Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.

The information in this publication is believed to be accurate as of the publication release date. However, Teledyne Princeton

Instruments does not assume any responsibility for any consequences including any damages resulting from the use thereof. The

information contained herein is subject to change without notice. Revision of this publication may be issued to incorporate such

change.

Teledyne Princeton Instruments

3660 Quakerbridge Rd

Trenton, NJ 08619

TEL: 800-874-9789 / 609-587-9797

FAX: 609-587-1970

2 PIXIS System Manual Issue 5

Revision History

Issue Date List of Changes

Issue 5 May 22, 2019 Issue 5 of this document incorporates the following changes:

• Updated to standard document template;

• Rebranded as Teledyne Princeton Instruments.

Issue 4 April 20, 2016 Issue 4 of this document incorporates the following changes:

• Removed Declaration of Conformity.

Issue 3 October 16, 2015 Issue 3 of this document incorporates the following changes:

• Updated the Declaration of Conformity.

Issue 2 March 14, 2013 Issue 2 of this document incorporates the following changes:

• Added LightField;

• Added CoolCUBEII;

• Added eXcelon;

• Updated Warranty;

• Removed Appendix E, USB 2.0 Card Installation;

• Cumulative editorial corrections and updates.

Issue 1 February, 2008 This is the initial release of this document.

Teledyne PIXIS - Page 2