TELEFONICA DOMO - Page 20

3838
3838
38
3939
3939
39
DOMO DOMO
DOMO DOMO
DOMO
MessaMessa
MessaMessa
Messa
gg
gg
g
es Hands Fes Hands F
es Hands Fes Hands F
es Hands F
rr
rr
r
eeee
eeee
ee
DOMO DOMO
DOMO DOMO
DOMO
MessaMessa
MessaMessa
Messa
gg
gg
g
es Hands Fes Hands F
es Hands Fes Hands F
es Hands F
rr
rr
r
eeee
eeee
ee
Pressing the cursor keys p and q (20)
you can move through the list of
messages from the most recent to the
oldest or vice versa.
Having selected a message, press the
Mensajes/Aceptar key (3) to view the
text and with the cursor keys p and
q (20) to access it.
If it is a private message, in the finder
this message will be displayed -
Type the security key (of 4 digits) and
press the Mensajes/Aceptar key (3).
If the key is correct, the number (or
name) will be displayed, followed by
the text. Move through the text using
the cursor keys p and q (20).
To leave the message, press the
Desactivar/Salir key (4).
If the message is incoming (received),
press the Mensajes/Aceptar key (3)
to displayed in the viewer, these
options - to Respond, to Forward, to
Erase and to Keep.
For outgoing messages, the options are
- to Forward, to Erase and to Keep.
Using the cursor keys p and q (20),
you can access any of them.
When this message is displayed – (as
indicated in the section on reading
Messages on page 37), press the
Mensajes/Aceptar key (3). To reply to
the message, proceed as detailed on
page 33.
When this message is displayed – (as
indicated in the section on reading
Messages page 37), press the
Mensajes/Aceptar key (3),and you
can modify the message content.
Press the Mensajes/Aceptar key (3)
and proceed as indicated in the
‘Despatch of Messages’ on page 34.
On seeing this message - (as
indicated in the section on Reading
Messages on page 37), press the
Mensajes/Aceptar key (3) and the
message will be deleted.
From the list of messages that have
been ‘Read’, access the message
required and press the Borrar key
(17) to Erase it. Confirm by pressing
the # key. You cannot erase
messages that have not been read.
On seeing this message - (as
indicated in the section on Reading
Messages on page 37), press the
Mensajes/Aceptar key (3), and it will
store the message.
During the activation or deactivation
of the text messaging service (SMT),
as well as during the despatch or
reception of a text message, the
following errors may occur -
1. Despatch Error - this error appears
if the message has not been
possible to despatch because of
communication failure. In the
viewer this message will be
displayed for a few seconds.
2. Error - service not activated This
error happens when you try to send
a text message without first
activating the service. Displayed in
the viewer will be -
3. Destination Error - when the
addressee doesn’t have the text
messaging service activated. The
message in the viewer will be -
To erase
messages
To keep
messages
Error types
01!
üü
üü
ü î (PEPE)
¿CLAVE?
1234
ç è
REPONDER
ç è
REENVIAR
ç è
BORRAR
ç è
GUARDAR
ç è
RESPONDER
ç è
REENVIAR
BORRANDO
CONFIRME CON #
BORRANDO
GUARANDO
ERROR ENVIO
ç è
BORRAR
ç è
GUARDAR
ERROR, ACTIVESE
ERROR DESTINO