4
Non contractual document subject to change in case of typographical errors (Mktg1011) COPYRIGHT SOPEG 2011
The manufacturer reserves the right to modify the product specifications without notice.
4. Installation
- Take your frame and its accessories out of their packaging.
- Remove the plastic film protecting the front of the frame.
- Pull the plastic tab protecting the contacts in the remote control.
- Stand the frame in the desired location, pulling the adjustable stand towards you (see diagram
above).
- Connect the electrical cord to the frame in the space provided.
- Plug your frame into an outlet. Your frame will start up automatically.
II. Use your frame
1. Selecting a language
During the first use, the animated demo is played. To exit and go to the
frame functions, simply press the “Slideshow” key on the remote.
The language selection screen then appears.
- Select your language using the arrow keys on the remote
control, then press “ENTER”.
Once you have selected your language, the frame is ready for use.
Simply insert a memory card or flash drive to begin playback of your pictures.
Caution: The animated demo is contained in the folder named “DEMO”. You must delete it for the
frame to keep benefit of the 2 GB internal memory.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
