3300 SERIES ANALOG USER GUIDE www.telematrix.net 11
handset batteries, either NiCd or NiMH, used in
TELEMATRIX, INC. cordless products. If a product
fails this warranty during the warranty period,
TELEMATRIX, INC. will, at its option, either repair
or replace the defective product or parts, or
deliver replacements for defective products or
parts on an exchange basis at no additional charge
to the customer except as set forth below. Repair
parts or replacement products may be either new
or reconditioned. Products or parts returned to
TELEMATRIX, INC. under this warranty will become
the property of TELEMATRIX, INC. Warranties on
products repaired by TELEMATRIX, INC. expire at
the termination of the original warranty period.
This limited warranty does not cover
1. Products or parts which are damaged,
abused or misused;
2. Any damage resulting from improper
installation, maintenance or operation of
the product;
3. Damage resulting from unauthorized
modification or repair of the product, or
from improper connection of the product to
other equipment;
4. Cords, connectors and replaceable batteries;
5. Damage in transit to the TELEMATRIX, INC.
repair facility;
6. Any product or part unless proof of date
of purchase is submitted with the product
when returned for warranty repair; or
7. Costs incurred by the customer in removing
and shipping the product to TELEMATRIX,
INC. for repair or replacement, and costs of
reinstallation of the product.
8. Products or parts which are not owned and
used by the original end user customer.
The cost and risk of loss or damage for sending
the product to TELEMATRIX, INC. will be borne by
the customer.
Line On Hold: LED turns from green (in-use) to red
(hold) on telephone that places the call on hold. All
remote extensions show green (in-use).
PLACING A CALL
Press either Line 1 or Line 2 selector key that does
not show a green in-use indication.
Lift the handset.
Dial out using the numeric dial pad.
RECEIVING A CALL
On an incoming call, the telephone will ring and
the line status indicators will show blinking red.
Select the line key for the line that is ringing.
Lift the handset.
TO PLACE A CALL ON HOLD
Press the Hold key. The call will automatically be
placed on hold. The line status indicator will turn
from green to red.
Hang up the handset.
To return to the held call, select the appropriate
line key and lift the handset.
Note: The telephone has an electronic hold
feature. The call on hold can be released from a
remote extension.
Statement of Limited Warranty
TELEMATRIX, INC. warrants to its [original
end customer] [purchaser] that Spectrum
PLUS, Marquis and RETRO branded products
manufactured by TELEMATRIX, INC. are free
from defects in materials and workmanship for
five (5) years after the date of purchase, products
manufactured by TELEMATRIX, INC. are free from
defects in materials and workmanship for three
(3) years, other than the following products for
which the warranty period shall be one (1) year:
To Next Page
Loading...
