Teleorigin RB900SG-E5 - Page 24

24
RB900SG Commands
RB900SG GET UPTIME<CR><LF>
Gets the number of seconds since the device
startup
Response
xxxx<CR><LF>
Response example
868<CR><LF>
RB900SG RESET<CR><LF>
Resets the device
Response
-
Response example
-
RB900SG TIME<CR><LF>
Returns the current time in human-readable
version
Response
Time: xxxxxxxxxx, Xxx Xxx xx xx:xx:xx
xxxx<CR><LF>
Response example
Time: 1619618224, Wed Apr 28 13:57:04
2021<LF><CR><LF>
RB900SG LOG PRINT<CR><LF>
Sends all entries from the event log
Response
0d 00:00:01 - L - x.x.x<CR><LF>
0d 00:00:15 - L - SIM ready<CR><LF>
0d 00:00:31 - L - GSM registered<CR><LF>
0d 00:00:32 - L - GPRS
registered<CR><LF>
0d 00:00:33 - L - IP: xx.xx.xx.xx<CR><LF>
0d 00:00:33 - L - PDP activated<CR><LF>
0d 00:00:33 - L - Sync to NTP
success<CR><LF>
0d 00:00:33 - L - Data port
opened<CR><LF>
0d 00:00:34 - L - Cfg port
opened<CR><LF><ETX>
Response example
0d 00:00:01 - L - 2.2.2<CR><LF>
0d 00:00:15 - L - SIM ready<CR><LF>
0d 00:00:31 - L - GSM registered<CR><LF>
0d 00:00:32 - L - GPRS
registered<CR><LF>
0d 00:00:33 - L - IP: 46.77.88.87<CR><LF>