HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 7 of 229
1.4. Document Organization
This document contains the following chapters:
Chapter 1: “Introduction” provides a scope for this document, target audience, contact and
support information, and text conventions.
Chapter 2: “Overview” about the aim of this document and implementation suggestions.
Chapter 3: “AT Commands” The core of this reference guide.
Chapter 4: “ACRONYMS AND ABBREVIATIONS”
Chapter 5: “Document History”
1.5. Text Conventions
Danger – This information MUST be followed or catastrophic equipment failure or bodily
injury may occur.
Caution or Warning – Alerts the user to important points about integrating the module, if
these points are not followed, the module and end user equipment may fail or malfunction.
Tip or Information – Provides advice and suggestions that may be useful when
integrating the module.
All dates are in ISO 8601 format, i.e. YYYY-MM-DD.
1.6. Related Documents
3gpp TS 27.005 specification and rules
3gpp TS 27.007 specification and rules
Hayes standard AT command set
Rockwell RC56D & RC336D
1vv0300893 HE863 family software user guide
To Next Page
Loading...
